My Computer Wont Read My External Hard Drive

USB devices like Hard Drives, Pen drives, and Memory Bill of fare, etc. are the easy mode to shop and transfer data from one computer to another. These USB drives are portable and easy to handle, just sometimes you might face the Difficult disk non detected a trouble with Windows PC. This happen when the USB port did non recognize the external USB drives. When you try to access the data from the difficult drive or USB device, you lot run into the following USB Device Not Recognized error message:

"Ane of the USB devices fastened to this computer has malfunctioned, and Windows does non recognize information technology for assistance in solving this problem, click this message."

इस पोस्ट को हिंदी में पढ़ने के लिए यहां क्लिक करें।

Tabular array of Content

• • How to set up External Hard Disk not Detected in Windows?
    • • • • Disconnect the power supply
          • Disconnect USB Device
          • Update USB device drivers
          • Change Drive Letter
          • Fix USB Root Hub
          • Change USB Selective Suspend Settings
  • Contact Data Recovery Service Provider
  • Different situations of  Hard Deejay have non detected errors

How to fix External Hard Disk not Detected in Windows?

Disconnect the power supply

Sometimes, a very simple play tricks can fix an external difficult disk non detecting a problem. Follow the below steps to employ this play a joke on.

• Shut Down your figurer
• Disconnect the power cable from your computer and wait for a few minutes
• Reconnect the power cable and Start your computer.

Disconnect USB Device

• Disconnect the USB devices from your computer
• Restart your computer
• Reconnect USB devices to your figurer

[NOTE]: If the current USB port doesn't detect the hard drive then, try to connect it with another USB port. If it is recognized by other USB ports and then, there could be a hardware problem with one of the USB ports. If no USB port recognizes the device then, endeavour another solution. Don't use whatever USB hub to connect the device to the calculator.

Update USB Device Drivers

If all USB ports are working fine and then you demand to cheque for the latest USB driver installed on the computer. Because sometimes erstwhile drivers tin can prevent the drive to connect to the PC and shows the hard disk non detected an error. To bank check commuter status follow the beneath steps.

• Press Windows + R primal together and then, blazon devmgmt.msc in the run dialogue box and click on OK.
• Expand disk drivers and right-click on the continued external USB drive.
• Click on properties and select the Driver tab.
• Click on Update Commuter Software and follow the farther didactics to update the driver.

[NOTE]: if this method doesn't work, then download and install the updated USB drivers from the computer manufacturer's website. This is useful in case if yous are trying to install a commuter for a printer, scanner, and other input/output USB device.

Change Bulldoze Letter

Check whether you can see your external USB Bulldoze in Disk Management, so rename or modify the drive letter of the alphabet. To practise this follow the below steps.

1. Right-click on This PC or My Computer and click on Manage.

two. Select Disk Management.

3. Right-click on the connected external drive and choose Modify Drive Letter and Paths.

4. Click Add together, and then assign a new drive letter from the driblet-down list and click OK.

Prepare USB Root Hub

• Printing Windows + R primal together and so type devmgmt.msc and click on OK.
• Aggrandize Universal Serial Bus controllers.
• Right-click on USB Root Hub and click Properties.
• Select Ability Direction and uncheck the Allow the figurer to turn off this device to save the power checkbox. Click ok and save changes.

[NOTE]: Echo this process for all available USB Root Hubs. Save changes for each process and and so restart your PC. If nonetheless you encounter a USB device non recognized problem and then become back to the ability management tab for each one and check the box over again.

Change USB Selective Suspend Settings

1. Become to Control Console and click on Hardware and Sound.

2. Click on Power Options.

3. Select Change Plan Settings nether preferred plans. Balanced (recommended).

four. Click on Change advanced power settings.

5. Expand USB settings and USB selective suspend settings.

half dozen. Select Disable from the drop-downwardly card.

7. Click "Utilize" and "OK" to salve the settings.

[Annotation]: If yous use the laptop, then you'll meet two options: On Bombardment and Plugged in. So, select disable for both settings respectively.

Contact Data Recovery Service Provider

If all the higher up-mentioned solutions don't fix the external hard drive not detect the problem. And y'all are still getting the same error; then there are high chances that your difficult drive has become expressionless. In this situation, you demand to take the help of a Professional Difficult Drive Recovery service provider.

If your problem is resolved, then it is advised that you should take a fill-in of your hard drive data; to avert any data loss in the future.

Unlike situations of  Hard Disk take not detected errors

Hard drive not detected error/issue tin can be acquired by the following situations:

• • The USB commuter has become unstable, outdated, or decadent
  • USB ports become faulty, damaged, or broken
  • Division issues on your external USB device
  • The USB device is malfunctioned or damaged
  • The wrong file system in an external drive
  • Virus-infected PC

If the problem all the same persists after implementing the above steps then possibility that your hard drive is severely corrupted or damaged. In that case, you can approach a reliable data recovery service provider.

shermanlemelow.blogspot.com

Source: https://www.stellarinfo.co.in/blog/how-to-fix-external-hard-disk-drive-not-recognized/

Share this post